Vat Dyes -Permanent Vat Dyes for Cottons
Dyeing Instructions
- Set high level dye bath temperature to 130 Degrees.
- *Add dye.
- Run bath 5 minutes and *add Caustic in 2 equal feeds (Do NOT Drain).
- Run bath for 15 minutes (Do NOT Drain).
- *Add Sodium Hydrosulphite.
- Run bath for 20 minutes.
- Drain.
- Fill washer to high level with hot water and *add Sodium Percarbonate.
- Run bath for 10 minutes.
- .Drain.
- .Run a light suds with hot water for 8 minutes.
- Rinse until clear in cold water
Vat Dye Formula
| peration |
Level |
Temperature |
Time |
Supplies |
| 1. Load Washer |
|
|
|
Do not exceed 75% capacity |
| 2. Dye/No Drain |
High |
130 Degrees |
5 |
Add Dye |
| 3. Dye/No Drain |
High |
130 Degrees |
15 |
*Add Caustic in 2 equal feeds |
| 4. Bath |
High |
Hot |
10 |
*Add Sodium Hydrosulfite |
| 5. Drain |
|
|
|
|
| 6. Suds/Drain |
High |
Hot |
8 |
Add detergent to suds |
| 7. Rinse/Drain |
High |
Cold |
2 |
Repeat until drain is clear |
|
IMPORTANT:Always add chemical products while washer is rotating downward away from operator.
Vat Dyes are available in all popular colors.
To place an order or obtain additional information, call Customer Service at 1-800-274-4393
